Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
2.
Attach Locking Clip
Thread both portions of the
vehicle belt onto the locking clip,
as close to the latch plate as
possible.
3.
Position Locking Clip
Position locking clip about 2.5 cm
(1 in.) from vehicle belt's buckle
plate.
4.
Rebuckle Vehicle Belt
57
5.
Check Vehicle Belt
Tightness
Grasp the child restraint at the
belt path with one hand. Push
and pull the child restraint from
side to side, forward and back.
The child restraint should not
move more than 2.5 cm (1 in.)
and the vehicle belt should not
loosen.
NOTE:
2.5 cm (1 in.) or if the vehicle belt loosens, try reinstalling the
child restraint or try another seating location.
Secure your child in the child restraint.
When installed rear-facing, make sure the child restraint is
properly reclined according to your child's weight.
When installed forward-facing, make sure to tighten the
tether strap.
If you still have questions after installing the locking clip
please contact our Consumer Relations department.
Remove the locking clip when the vehicle seat belt is not
being used with a child restraint.
58
If it moves more than
Publicité
