Publicité
Les langues disponibles
Les langues disponibles
a.
From the front of child restraint,
pull harness straps out of the
upper harness slots.
b.
Rethread harness straps into new
upper harness slot location.
NOTE:
harness straps.
12.
Thread Harness Straps
BELOW Metal Bar
DO NOT twist harness straps.
13.
Attach Harness Straps to
Splitter Plate
From the back of the child
restraint, fit the harness strap
loops onto the splitter plate.
NOTE:
the harness strap loops faces towards you. DO NOT twist
harness straps or harness adjustment strap and make
sure the harness straps are COMPLETELY ON the splitter
plate.
14.
Position Headrest
Position headrest behind the
child's head. Align the mid-point
of the child's ears with the mid-
point of the headrest.
17
All manuals and user guides at all-guides.com
DO NOT twist the
Make sure sewn end of
Make sure
bar is locked
position. Failure to
do this can result
in serious injury or
death.
Harness straps MUST be threaded below
the metal headrest adjustment bar.
Do not use this child restraint
rear-facing if the top of your
child's head is above the top of
the child restraint's headrest.
Do not use this child restraint
forward-facing if the midpoint
of your child's ears are above
the top of the child restraint's
headrest.
Make sure the harness height is correct
for your child's size.
Incorrect use of the harness system is
the most common mistake people make.
Verify frequently that the harness height
is correct for your child's size. It is
very important to read, understand and
follow all instructions and warnings.
Failure to follow these steps can result in
serious injury or death.
18
metal
into
Publicité
