Ibiza sound DJ21USB-MKII Manuel D'utilisation page 20

Cautions
All operating instructions should be read before using this equipment.
Do not expose this unit to direct sunlight or to a heat source such as a radiator or stove.
This unit should be cleaned only with a damp cloth. Avoid solvents or other cleaning detergents.
When moving this equipment, it should be placed in its original carton and packaging. This will reduce the
risk of damage during transit.
To prevent electric shock, do not remove top or bottom covers.
No user serviceable parts inside.
Refer servicing to qualified servicing personnel.
Disconnect power cord before removing back panel cover to access gain switch.
No naked flame sources, such as lighted candles, should be placed on the apparatus
The unit should only be used in moderate climates
A minimum distance of 0.5m around the unit must be kept to ensure sufficient ventilation and avoid
overheating
Connections
1. Before using this unit, make sure that the AC Adaptor (21) is correct voltage.
2. The unit is supplied with AMP output jacks. The AMP (20) jacks are unbalanced and used to connect to
your amplifier.
3. The MIC L (15) and MIC R (16) input accepts a 1/4" connector.
4. On the rear panel are two stereo PHONO/LINE (17) & (18) inputs and 1 stereo LINE (19) input. The
PHONO/LINE (4) enables you to set the (17) input to phono or Line. The PHONO/LINE (6) enables you to
set the (18) input to phono or Line. The USB/LINE (8) enables you to set the input to USB or Line (19).
Headphones can be plugged into the rear panel mounted HEADPHONE (14) jack.
Operation
1. POWER ON: Once you have made all the equipment connections to your mixer, press the POWER (12).
The power will turn on and the POWER LED (22) will glow RED.
2. CHANNEL 1: SWITCH (4) allows you to select the PHONO 1/LINE 1 (17) jack to input phono or line level.
The CHANNEL SLIDE (5) controls the input level of this channel.
3. CHANNEL 2: SWITCH (6) allows you to select the PHONO 2/LINE 2 (18) jack to input phono or line level.
The CHANNEL SLIDE (7) controls the input level of this channel.
4. CHANNEL 3: SWITCH (8) allows you to select the USB OR LINE 2 (19) jack to input
CHANNEL SLIDE (9) controls the input level of this channel.
5. CROSSFADER: The CROSSFADER (10) allows you to the Mixing CH1/CH2 source into another.
6. TALKOVER (3): The purpose of the talkover section is to allow the program playing to be muted so that
the mic can be heard above the music. When you press the SWITCH, the talkover will be on and the
volume of all sources except the Mic inputs are lowered by 12 dB. The Micro (2) allows you to control the
level of MIC1/MIC2.
7. Connect your headphones to the headphones socket and select the desired channel (channel 1-3 or MIC)
for monitoring with the Cue switch(1). With this knob PHONE(11), you can adjust the headphones
volume
8. DISPLAY: The DISPLAY (13) indicates either the MASTER output left and right levels.
9. The USB (23) jack can connect to USB stick that contains exclusively MP3 files.
10. |<< (24) : Use this button to re-start the track or to select the previous track.
11. Play/Pause (25): Each time you press this button, the operation changes from play to pause or from pause
©Copyright LOTRONIC 2013 DJ21USB-MKII
mp3 or line level. The
3