Publicité
Les langues disponibles
Les langues disponibles
English
Application
Bus door loudspeaker with inte-
grated loudspeaker and microphone.
Performance features:
• Loudspeaker, voice volume can be
adjusted
• Durable electret microphone
• Work contact for door release,
can be controlled without additional
wiring via existing bus line
• Integrated camera actuation
• A code lock can be connected for
digital call input
• Acoustic feedback when pressing
a call button can be activated
Electrical voltage
Mounting, installation and servicing
work on electrical devices may only
be performed by a suitably qualified
electrician.
Servicing
The functional unit can be com-
pletely exchanged if required.
Information regarding replacement
and checking the functional units
can be found in the product infor-
mation for the door station.
1 Connection pcb
For surface mounted door stations:
Connection not via connection pcbs
but in a similar manner as Siedle
Vario using terminal blocks.
Terminal assignment
Ta, Tb
In-Home bus
Vc, GND Camera actuation
Tö
Relay contact door release
CD6
Call wire for
SDRM/SCOM
b, c
Power supply 12 V AC
T1, T2
Light button
M1, M2 Pilfer safeguard
Installation
2 Basic circuit diagram for audio
3 Basic circuit diagram for video
Commissioning
Installation and commissioning are
described in the system manual.
The latest issue can be found in the
download area at www.siedle.com.
4 Programming the call buttons
Please note that when program-
ming the Bus door loudspeaker, the
programming button "b" assumes
the function of the light button.
To actuate using the program-
ming button, use the blunt end of
the plastic key "a" inserted in the
inspection shaft cover.
5 Volume setting
If required, the volume can be
altered at the opening with the
loudspeaker symbol "c" using the
plastic key "a" located inside the
inspection shaft cover.
The programming button and the
potentiometer for volume adjust-
ment are only accessible when the
operating panel is removed.
Information regarding mounting and
removal can be found in the product
information for the door station.
6 Sequence of call button
assignment
(important for Plug+Play program-
ming.)
In the case of door stations with
two-row arrangement of call but-
tons, the first call button is at the
top left.
Specifications
Contact type: Contact 15 V AC,
30 V DC, 2 A
Switching time: DR, 3 sec
Ambient temperature:
–20 °C to +55 °C
7
Publicité
