Setup Menu - Jensen VM9313 Instructions D'installation Et D'opération

VM9313

SETUP MENU

To access system settings, press the SETUP button (31) on
the remote control or touch the button on the screen to
enter the "SETUP" menu. The "GENERAL" sub-menu
appears highlighted in blue.
SETUP
RADIO RADIO
Bluetooth
General Language Audio
Rating
Clock Mode 12Hr
Hardware
Clock 04 : 31 AM
P.VOL
Tuner Region USA
TS Cal
Beep On
Demo
Accessing Menu Items
Touch the sub-menu name or press the
<<
direction buttons (22,14, 17, 19) on the remote control to
select a sub-menu (Language, Audio, Rating, etc.).
DIRECTION BUTTONS
The features available for adjustment under the highlighted
sub-menu option will appear in the center of the screen.
Adjusting a Feature
1. Use the touchscreen or press the |<< or >>| buttons (17,
19) on the remote control to select the feature to be
adjusted.
2. Enter the option field for the feature you want to adjust
by using the touchscreen or pressing the >/|| button (18)
on the remote control. A submenu appears in a second
row with the selected option highlighted in blue.
3. Select a new value by using the touchscreen or pressing
the >> or
<<
4. Use the touchscreen or press the >/|| button (18) on the
remote control to confirm setup.
General Sub-menu Features
12:27 AM Setting Options
Clock 12Hr
Mode
BACK
24Hr
Clock (HH:MM)
Tuner USA
Region
, >>, |<<, or >>|
Europe
Beep On
Off
Language Sub-menu Features
If a DVD supports more than 1 Subtitle or Audio language, all
the languages are available for selection during playback. If
the selected language is not supported by the DVD, then the
default language is used.
buttons (14, 22) on the remote control.
Function
Clock displays 12 hour time
using AM and PM.
Clock displays 24 hour time up
to 23:59.
Clock appears in the top right
corner of the screen and on the
LCD screen during certain
operations. NOTE: The AM/PM
indication will change as you
continue to adjust the hour past
12.
FM Band: 87.9MHz -
107.9MHz, channel separation
@ 200kHz
AM Band: 530kHz - 1710kHz,
channel separation @ 10kHz
FM Band: 87.6MHz -
107.9MHz, channel separation
@ 100kHz
AM Band: 531kHz - 1602kHz,
channel separation @ 9kHz
When turned on, an audible
beep tone confirms each func-
tion selection.
No beep sounds.
10
Setting Options Function
OSD English On Screen Display appears in
English.
DVD Audio English DVD Audio is heard in English
when the option is available.
DVD Subti- English DVD subtitles automatically
tle appear in English when avail-
able.
Auto DVD subtitles appear accord-
ing to the default subtitle lan-
guage specified on the disc.
Off DVD subtitles do not appear
automatically.
Disc Menu English DVD menu (if applicable) is
displayed in English.
Audio Sub-menu Features
Setting Options Function
DRC Off Employ the Dynamic Range
Control for better playback for
On
low volumes.
Subwoofer Off Turn the subwoofer on/off.
On
Sub.W 0 Subwoofer output IN phase
Phase
180 Subwoofer output OUT OF
phase
NOTE: Depending on your
installation, reversing the sub-
woofer phase may increase
Bass output.
Sub Filter 80Hz Selecting a crossover fre-
quency sets a cut-off frequency
120Hz
of the subwoofer's LPF (low-
pass filter) and the "SMALL"
160Hz
speakers' HPF (high-pass fil-
ter). The Crossover frequency
setting has no effect if the sub-
woofer is set to "OFF" and any
other speaker is set to
"LARGE".