Setup Menu - Jensen HD Radio VM8013HD Instructions D'installation Et D'opération

VM8013HD

SETUP MENU

During disc play, press the SETUP button (4) on the remote control to
access the SYSTEM SETUP menu.
SETUP MENU
LANGUAGE
RATING
Language Menu
Use the , , or cursor buttons to choose between LANGUAGE,
VIDEO, AUDIO, RATING or MISC setup options.
Table 2: System Setup Menu
LANGUAGE MENU
OSD language English
Espanol
Subtitle English
French
Spanish
Portuguese
German
Off
DVD menu English
French
Spanish
German
Portuguese
VIDEO MENU
Aspect Ratio 4:3
16:9
Video Format NTSC
PAL
01:02
AM
VIDEO AUDIO
MISC
Select the appropriate on-screen language for the
DVD
Choose the language you would like subtitles to
appear in (if available)
Turn subtitles off
Choose the language you would like DVD menu
to appear in (if available)
Image is presented with 4:3 aspect ratio.
Image is presented in wide view with a 16:9
aspect ratio.
The color signals are output in the standard NTSC
format.
The color signals are output in the standard PAL
format.
Table 2: System Setup Menu
AUTO
Smart Picture Standard
Bright
Soft
AUDIO MENU
Audio Menu English
French
Spanish
German
Portuguese
RATING MENU
Set Password _ _ _ _
Parental CTR 1 KID SAFE
2 G
3 PG
4 PG13
5 PG-R
6 R
7 NC-17
8 ADULT
MISC MENU
Use Default Yes/No
Settings
Demo Run
Auto Run On
Off
19
The color signal output is switched automatically
based on the current video input signal - NTSC or
PAL.
Select the appropriate audio language for the
DVD.
Enter a 4-digit password to activate the "Rating"
feature. The original password is "0000" and must
be entered before you can change the password
to a different 4-digit code.
Select the appropriate rating level for the intended
audience.
You may override higher ratings by using your
password.
Select "Yes" to restore the factory default settings.
Demo Mode scrolls through the various source
screens, simulating activity on the display. "Demo
Mode" is discreetly displayed in yellow text (below
the clock), to indicate the unit is in Demo Mode. To
stop Demo Mode, press and hold the SRC button.
When "Demo Auto Run" is On, the unit will
automatically display Demo Mode when powered
on.
When "Auto Run" is Off, you can select "Demo >
Run" to start Demo Mode.