Publicité
Les langues disponibles
Les langues disponibles
Warning! This machine produces an electromagnetic field during operation. This field may under some
circumstances interfere with active or passive medical implants. To reduce the risk of serious or fatal injury,
we recommend persons with medical implants to consult their physician and the medical implant manufacturer
before operating this machine.
d- Laser
The laser light used is Class 2 with maximum 1mW power and 650nm wavelength. These lasers do not
normally present an optical hazard, although staring at the beam may cause flash blindness.
WARNING: Do not stare directly at the laser beam. A hazard may exist if you deliberately stare into the
beam, please observe all safety rules as follows:
• The laser shall be used and maintained in accordance with the manufacturer's instructions.
• Never aim the beam at any person or an object other than the workpiece.
• The laser beam shall not be deliberately aimed at personnel and shall be prevented from being directed
towards the eye of a person or animal for longer than 0.25s.
• Always ensure the laser beam is aimed at a sturdy workpiece without reflective surfaces, i.e. wood or
rough coated surfaces are acceptable.
Bright shiny reflective sheet steel or the like is not suitable for laser use as the reflective surface could direct
the beam back at the operator or nearby bystander.
• Do not attempt to change any parts of the laser guide. Do not change the laser light assembly with a
different type. Repairs must be carried out by the laser manufacturer or an authorized agent.
3.8- Warning!
- Never work on materials containing asbestos (as asbestos is considered carcinogenic).
- Do not assume your knowledge of the tool. Remember that a split second of negligence is sufficient to cause
serious damage and/or injury.
3.9- In the event of emergency
Stop immediately the tool and unplug from mains.
Assist the injured person with first aid and call for medical assistance as quickly as possible.
3.10- Do NOT use the tool:
- For other uses that the one specified in this manual.
- When tired or under the influence of drugs, alcohol, or medication.
- In explosive atmosphere (e.g. in presence of flammable liquids, gas, dust ...)
- If the product is damaged or if not fully or securely assembled.
- If the switch is damaged and does not allow to stop the tool.
- If the tool is not working properly, has been dropped, damaged, or dropped into water, do not attempt to
repair it; bring it to your retailer for proper service, replacement or repair, or a person with similar
qualification to avoid any danger.
IV. GETTING STARTED
Before any intervention on product, ensure that product is disconnected from its
power source.
4.1- Unpacking
Remove product from its packaging.
Check that tool and accessories are not damage
4.2- Content
- 1 electric circular saw
- 1 saw blade
Publicité
