Publicité
Les langues disponibles
Les langues disponibles
EN – Original instructions
I. Parts List
II. Characteristics
Intended Use:
- The saw is intended for cutting on wood materials (using the suitable cutting accessory).
- Please refer to the specifications table to know the maximum dimensions of cutting blade that the tool can
mount.
Not Intended Use:
- Do not use the tool for working on products containing asbestos or other toxic or hazardous materials.
- Do not use the tool for unintended purposes (e.g. cutting products containing hazardous materials ...), or
for any use not described in this manual.
- The tool is not intended for artisanal, commercial, professional and / or industrial use.
Residual risks:
Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors.
The following hazards may arise in connection with the tool's construction and design:
a. Damage to lungs if an effective dust mask is not worn.
b. Damage to hearing if effective hearing protection is not worn.
c. Contact with the rotating cutting blade may cause serious injury.
d. Exposure to electricity by using a non-standard defective electrical connection lines
REMARK:
The declared vibration emission value has been certified to EN 60745-1.
This can also be possibly applicable for another device with the same construction and operated with same
energy supply.
WARNING:
A certain level of noise emitted from this machine is not avoidable.
Plan noisy work according to local laws and at specific times.
Keep rest periods and if necessary restrict the working hours to a minimum.
For your own personal protection and the protection of bystanders have suitable hearing protection worn.
III. Safety instructions
IV. Getting Started
V. Operation
VI. Maintenance and Storage
Publicité
