Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
• Fuel supply line (1)
Fit the compression coupler (7) with sealing washer (8) into the
lid, cut the suction pipe to the correct length - the lower end of
the pipe should be 10 - 15 mm (
tank - and fit the suction pipe in the compression coupler.
• Fuel return (2)
Fit the hose pillar with sealing washer (8) into the lid.
Fit the plug (9) if the engine has no fuel return pipe.
• Tank vent (3)
Fit the hose pillar with the sealing washer (8).
• Earth connection (4)
Fit the terminal tag.
• Blanking plate/sender for fuel level indicator (10)
Fit either the blanking plate or a fuel level indicator sender; always
use the gasket (11).
vetus® Connector kits FTLxxxx
3
/
-
5
/
") above the bottom of the
8
8
Check the tightness of all connections before filling the tank.
2
9
10
8
11
6
5
N
!
ote
ENGLISH
3
1
8
7
8
4
10 - 15 mm
3
5
(
/
" -
/
")
8
8
5
040106.02
Publicité
Table des Matières
