Other Functions; Using The Rotary Commander - Sony CDX-MP70 Mode D'emploi

Other Functions

You can also control the unit (and optional CD/
MD units) with a rotary commander (optional).
The illustrations in this manual are of the RM-X5S.
The explanations are the same for the RM-X4S.

Using the rotary commander

First, attach the appropriate label depending on
how you want to mount the rotary commander.
The rotary commander works by pressing
buttons and/or rotating controls.
S O U N D
M O D E
D S P L
Inserting the supplied lithium battery
(RM-X5S only)
Tip
See "Notes on lithium battery" on page 31 for
information on lithium battery.
22
D S P L
M O D E
S O U N D
x
+ side up
By pressing buttons
Turn the dial to change the
direction of infrared rays.
(RM-X5S only)
(ATT)
(SOUND)
(SOURCE)
(DSPL)
Rotate the VOL control
to adjust the volume.
Press To
(SOURCE)
Change source (radio/CD/
MD*
(MODE)
Change operation
(radio band/CD unit/MD*
unit)
(ATT)
Attenuate sound
(OFF)*
2
Stop playback or radio
reception/Power off
(SOUND)
Select the sound menu
(DSPL)
Change the display item*
(For 2 seconds to scroll the
display item)
*1 Only if the corresponding optional equipment is
connected.
*2 If your car has no ACC (accessory) position on the
ignition key switch, be sure to press (OFF) for 2
seconds to turn off the clock indication after turning
off the ignition.
*3 When using the RDS function, PTY data cannot be
displayed if (DSPL) of the rotary commander is
pressed.
(MODE)
(OFF)
1 /AUX)/Power on
1
3