Storing Only Desired Stations; Tuning In A Station Through A List; List-Up - Sony CDX-MP70 Mode D'emploi

Storing only desired stations

You can manually preset desired stations.
1
Press (SOURCE) repeatedly to select
the radio.
2
Press (MODE) repeatedly to select the
band.
3
Press the –m or M+ button to tune
in the station that you want to store.
4
Press (MENU), then rotate the
./> control dial until "Preset
Edit" appears.
5
Press the ./> control dial.
6
Rotate the ./> control dial to
select the number that you want to
store.
7
Press the ./> control dial.
The stored station indication appears in the
display.
8
Press (MENU) twice.
Note
If you try to store another station on the same stored
number, the previously stored station will be erased.
Operating with the card remote
commander
1
Press (SOURCE) repeatedly to select
the radio.
2
Press (MODE) repeatedly to select the
band.
3
Press (SEEK -) or (SEEK +) to tune in
the station that you want to store.
4
Press the desired number button ((1)
to (6)) until "MEM" appears.
./> control
dial
Tuning in a station through a
list

— List-up

1
During radio reception, press (LIST)
momentarily.
The frequency or the name assigned to the
current station appears in the display.
After 5 seconds, the display returns to the
normal playback mode.
2
Rotate the ./> control dial until
you find the desired station.
If no name is assigned to the selected station,
the frequency appears in the display.
3
Press the ./> control dial to tune
in the desired station.
./> control
dial
17