M-system MFCDI 94 Serie Mode D'emploi page 200

BACKGUARD
Before installing the cooker, assemble the backguard "C" (fig. 8.2).
– The backguard "C" can be found packed at the rear of the cooker.
– Before assembling remove any protective film/adhesive tape.
– Remove the two spacers "A" and the screw "B" from the rear of the cooktop.
– Assemble the backguard as shown in figure 8.2 and fix it by screwing the central
screw "B" and the spacers "A".
C
B
A
Fig. 8.2
FITTING THE ADJUSTABLE
FEET
The adjustable feet must be fitted to
the base of the cooker before use.
Rest the rear of the cooker an a piece
of the polystyrene packaging exposing
the base for the fitting of the feet.
Fig. 8.3
200