Publicité
Les langues disponibles
Les langues disponibles
IMPORTANT: if the temperature in the hopper reaches or
exceeds 90
o
C. The stove will also turn off when the temperature
inside it reaches 700
e) Setting the fire and the blower
Pressing the settings button (i) twice will activate the fire setting
option. If the following controls:
flash, one of the following programs can be selected - P0, P1, P2,
P3, P4. "P0" is an automatic program, i.e. the stove automatically
adjusts the fire level to the set temperature. "P1" is an economic
program - when the set temperature in the heated room is
reached, the stove will automatically switch to the "P1" economy
program.
IMPORTANT: in the event that the fire darkens and smoke is
coming out of the chimney, the airflow in the combustion
chamber should be accelerated.
f)
Setting the operation of the pellet feeder
Pressing the settings change button (i) 3 times will activate the
option of setting the operating frequency of the pellet feeder. If
the following controls:
are blinking, you can set the operation of the pellet feeder
depending on the quality of the pellets used. The adjustment is
in the 1-5 range. The "3" level is the factory setting, while the
value decrease/increase (b/c) buttons can be used to change the
frequency of the feeder, e.g. if you select level 2, it means that
the operating frequency will be 10% higher than the factory
setting for each of the programs, i.e. pellets will be fed more
frequently and the opposite will happen for higher values.
C.
o
Publicité
