Publicité
Les langues disponibles
Les langues disponibles
minimum recommended distance from each wall of the unit. Keep the device away
from any flammable materials or objects. Always operate the unit on a level, stable,
clean, fireproof and dry surface and out of the reach of children and persons of
impaired mental, sensory and intellectual functions. Place the unit in such a way
that the mains plug can be reached at any time. Ensure that the power supply to the
unit corresponds to that specified on the identification plate!
If it is not possible to place the appliance on a fireproof surface, place it on a non-
flammable, heat-resistant pad with a minimum thickness of 15 mm and extending
beyond the outline of the stove (see the technical data table) plus an additional 150
mm from the front.
ASSEMBLY OF THE DEVICE
IMPORTANT: Installation, electrical and water connection as well as functional
testing and maintenance must be performed only by an authorized, qualified
person. Install the product in accordance with local, national and state laws and
regulations.
Chimney/ventilation:
Minimum required insulated steel - T400 (or higher) - resistant to soot ignition. The
chimney should have a single, mandatory inspection hatch ("a" in the picture
below)/inspection flap (b), and the entire installation should be in accordance with
EN1856-1 and -2.
The chimney installation should be airtight, vertical, without any narrowings, made
of a smoke-impermeable material, thermally insulated (to avoid condensation or
cooling the smoke) and resistant to normal mechanical stress coming with time -
recommended AISI 304 chimney steel with a round section. The installation should
Publicité
