1. Control panel
2. Hopper lid
3. Hopper
4. Worm
5. Worm motor
6. Igniter
7. Air inlet pipe
8. Exhaust pipe (to the chimney)
9. Blower fan
10. Exhaust fan
11. Heat outlet
12. Hearth
13. Ash container
14. ON/OFF switch (on the back of the housing next to the power cord socket -
not visible in the picture)
3.2.
Preparation for operation
POSITIONING OF THE UNIT
The ambient temperature must not exceed 40°C and ambient humidity should not
exceed 85%. Place the unit in a way that ensures good air circulation. Maintain the