Publicité
Les langues disponibles
Les langues disponibles
2610051955.qxp_ROS10 ROS20VS 8/16/18 1:58 PM Page 10
CLEANING AND EMPTYING THE
Before opening the dust canister lid, it is
recommended to loosen dust from the
microfilter dust canister by gently striking it
against a solid surface (Fig. 8).
To empty canister, hold canister and maintain
a firm grip. Firmly push upward on tab on
corner of lid, and remove from canister (Fig. 9).
Knock excess dust out of the microfilter, or
remove dust with your fingers or a soft brush.
You may notice that all the dust may not come
out of the canister. This will not affect sanding
performance but will reduce dust collection
efficiency.
NOTE: Do not wash the micro filter with soap
and water. Dust may become more firmly
lodged in the pores, which will reduce dust
collection, and damage the micro filter.
FIG. 8
FIG. 10
Quality Products Online at:
DUST CANISTER
BOSCH VAC-
SERIES HOSE
DUST
PORT
GlobalTestSupply
www.
ATTACHING A VACUUM CLEANER
Dust collection can also be achieved by
attaching the tool to a vacuum cleaner / dust
extractor, hose and adapter, if necessary (all
sold separately).
1. Attach the hose to the vacuum cleaner /
dust extractor.
2. Attach the hose to the tool's dust port in one
of the following ways (Fig. 10):
- Bosch VH-series hoses - The VX120 hose
adapter is required (included with VH-series
hoses).
- Other 35mm and 22mm hoses, such as the
Bosch VAC-series hoses - Connect hose
directly to the tool.
- Common 1-1/4" or 1-1/2" hoses - The
Bosch VAC002 or VAC024 adapter is
required.
MICROFILTER
C4
DUST CANISTER LID
BOSCH VH-
SERIES HOSE
VX120
VAC002
VAC024
-10-
.com
FIG. 9
1-1/4"
OR
1-1/2" HOSE
sales@GlobalTestSupply
Publicité
