Télécharger Imprimer la page

Keysight EL30000 Serie Guide D'utilisation page 75

Publicité

Les langues disponibles

Les langues disponibles

Current Slew - Specifies the maximum or fastest allowable slew rate (positive or negative) when checked.
Unchecking these boxes lets you enter a slower slew rate in the appropriate fields. Separate slew settings can be
programmed for CC, CV, CR, and CP modes.
Track - Lets the negative slew rate track the positive slew rate when checked. Uncheck this box if you want to
program asymmetrical positive and negative slew rates. If asymmetrical rates are programmed and tracking is
turned on, the negative value is changed to track the positive value.
Constant voltage mode
In this mode, the load will sink enough current to control the DUT voltage to the programmed value. The load acts
as a shunt voltage regulator when operating in CV mode.
Voltage - Lets you enter a voltage value with the numeric keys. Press Enter to enter the value. You can also use the
knob to adjust the value in this field.
Range - Lets you select from two voltage ranges. The low range provides better resolution at low voltage settings.
Alternatively, you can use the knob or press Enter to toggle between the ranges in this field. See
Programming
Ranges.
Current Limit - You can specify a current limit that limits the input current when in CV mode. It is programmable up
to the rated current, with an over-range of 2%.
Refer to
Constant current mode
for descriptions of the Slew rate, Enable short, Track and Sense controls.
Constant resistance mode
In this mode, the load will sink a current linearly proportional to the voltage in accordance with the programmed
resistance value.
Resistance - Lets you enter a resistance value with the numeric keys. Press Enter to enter the value. You can also
use the knob to adjust the value in this field.
Keysight EL30000 Series User's Guide
75

Publicité

loading

Ce manuel est également adapté pour:

El33133aEl34143aEl34243a