Publicité
Les langues disponibles
Les langues disponibles
Menu
Datalog Run Stop
Knob
Scale or Ofs
Sc, Ofs, or Mrk
Marker On or Off
Properties
Auto Scale
Data logger marker view
Items
1
m1/m2 points
Shows where the measurement markers intersect the selected waveform. Data values at the bottom of the dis-
play are referenced to the intersect locations of the markers. Calculations are based on the data points in
between the intersect locations.
2
m1
Indicates the m1 marker value in volts, amps, or watts at the intersection point. Also indicates the distance in
time of the m1 marker in relation to the present trigger position. If a marker is out of view, an arrow indicates
the direction of the marker
3
m2
Indicates the m2 marker value in volts, amps, or watts at the intersection point. Also indicates the distance in
time that the m2 marker is in relation to the present trigger position. If a marker is out of view, an arrow indic-
ates the direction of the marker
4
Delta
Indicates the delta or absolute difference between the markers in units (volts, amps, or watts) and in time
(seconds).
106
Run or stop data logging.
Scale or Ofs
Marker (Mrk) only appear when Marker is enabled.
Selecting Mrk set the function of the Vertical and Horizontal knob to adjust the m1 and m2 marker position.
See
Using knob in data logger
Enables or disables the Marker view.
Sets the data logging and waveform displays properties. See
settings
.
Auto scales the traces on the display.
Description
view.
Description
.
.
Data logger properties and waveform
Keysight EL30000 Series User's Guide
Publicité
