VINCI EXPRESS COLD BREW Instructions page 8

HOW TO USE YOUR EXPRESS COLD BREW
IMPORTANT: Make sure that all surfaces are all clean of any unwanted minerals or coffee grounds
before using. This will ensure that the brewer will provide the best cup of cold brewed coffee.
FILL LINE
How To:
See it in Action!!
13
1. Fill the Carafe with fresh, room temperature
water, filtered water is best (or recommended).
Never fill past the Fill Line.
NOTE: Always use room temperature water when
brewing.
IMPORTANT:
NEVER USE HOT WATER
Using hot water will void warranty
TIP: Remember, water makes up over 99% of
all brewed coffee. For the best brewing results,
always use good quality, filtered water.
2. If not already in place, attach the Filter Basket
Bottom Cap to the Filter Basket by turning
clockwise until fastened tightly. Using the included
2 tablespoon scoop add approximately 7 scoops
of medium to coarse grind coffee into the
Filter Basket. NEVER exceed 8 scoops.
NOTE: Do not overpack or overfill the coffee. The
coffee should reach almost the top of the basket,
leaving about 1/2" space between the top of the
grounds and top of the basket.
3. Place the Filter Basket Top Cap onto the top of
the Filter Basket, pushing it until it is fully sealed.
4. Attach the Filter Basket to the Control Lid
by inserting it into the bottom of the Control
Lid and turning clockwise until it is secure, and
no longer spins. Before tightening, make sure
the Filter Basket is correctly aligned so that the
threading is straight.
IMPORTANT: Make sure all surfaces are clean of
debris especially around the O-Ring Seal. This
will prevent any leaks or malfunctions during the
brewing process.
5. Place the Control Lid with the attached Filter
Basket on the Carafe. Make sure the Filter Basket is
fully submerged in the water, and the notch on the
Control Lid is aligned with the Carafe Handle.
6. Attach the electrical Power Cord to the
connection on Control Lid, then plug into an
electrical outlet. Make sure that your Express Cold
Brew is on a flat, secure surface for brewing.
IMPORTANT:
•
This appliance has a polarized plug (one blade
is wider than the other). To reduce the risk of
electric shock, this plug is intended to fit into
the appliance and outlet one way.
•
If the plug does not fit into the outlet, reverse
the plug, and try to re-insert the plug into
the outlet.
•
Do not force the plug into the outlet.
14