Publicité
Preventive Maintenance Schedule:
Ground Level: During Each Servicing of the Camera, or raising/lowering of the payload:
- Ensure that all camera/payload attachments are rigid, properly installed and secure.
- Watch carriage/payload system during operation for any abnormal problems.
- Visually inspect cable for any damage, degradation or corrosion.
- Visually ensure lowering arm is rigidly and properly installed and connected to structure and no "looseness" is evident during rising or lowering payload is noticeable.
- Carriage lowers and raises and enters full home position without noticeable changes or interruptions form mechanical or electrical problems.
- General observation of all equipment for proper operation and in good operating order.
At Installed Elevation: During Each Servicing Lifting Arm at the elevated position; OR:
- No Later Than every 24 Calendar Months or 50 lowering and raising sequences, whichever comes first.
- Disconnect Power to the unit.
- Open top of lowering arm.
- Visually inspect and ensure interior of lowering arm is free and clear of any and all debris. Clean as necessary to restore unit interior to a clean and debris free
environment.
- V isually inspect for any loose or missing parts.
- Visually inspect for any rust, corrosion or degradation that will effect the unit operation.
- Thoroughly inspect lifting cable, pulleys and device for any sign of degradation or damage.
- Ensure all switches, brackets and sensors are securely seated and attached to their intended mounts and not damaged in any way.
IF ANY OF THE ABOVE CONDITIONS ARE FOUND; THE LOWERING ARM MUST BE PROPERLY REPAIRED BY QUALIFIED AND TRAINED
PERSONNEL PRIOR TO RETURNING TO SERVICE. Call the factory at 1.800.554.1124 FOR IMMEDIATE ASSISTANCE AT ANY TIME.
All manuals and user guides at all-guides.com
- END -
REV: 10 November 2010
Publicité
