Husqvarna 395 XP Manuel D'utilisation page 21

4. Assemble the winter plug (C).
A
5. For temperatures below 0°C/32°F, move the winter
plug from position 1 to position 2.
CAUTION: When the winter plug is in the
air nozzle for AirInjection
clean the air filter daily.
6. For temperatures below -5°C/23°F or in conditions
with snow, a winter cover is available. Assemble the
winter cover on the starter housing. The winter cover
decreases the flow of cool air and keeps snow away
from the carburetor space.
594 - 001 - 13.01.2020
B C
™
, you must
CAUTION: Remove the winter cover if the
temperature increases above -5°C/23°F. Put
the winter plug in in position 1 if the
temperature increases above 0°C/32°F. Risk
of too high engine temperature and damage
to the engine.
Heated handles (395 XPG)
The product has heated front and rear handles. The
electrical heating coils are powered by a generator.
Push the switch in the direction of the arrow to engage
the function. Push the switch in the opposite direction to
disengage the function.
Electrical carburetor heating (395 XPG)
Adjustment of the carburetor heating is done electrically
through a thermostat. This keeps the correct carburetor
temperature and prevents ice in the carburetor.
21