Black & Decker EPC126 Mode D'emploi page 10

ENGLISH
♦ Regularly clean the motor housing using
a damp cloth. Do not use any abrasive or
solvent-based cleaner.
♦ Regularly open the chuck and tap it to remove
any dust from the interior.
Protecting the environment
Separate collection. This product must
not be disposed of with normal household
waste.
Should you fi nd one day that your Black & Decker
product needs replacement, or if it is of no further
use to you, do not dispose of it with household
waste. Make this product available for separate
collection.
Separate collection of used products and
packaging allows materials to be recycled
and used again. Re-use of recycled
materials helps prevent environmental
pollution and reduces the demand for raw
materials.
Local regulations may provide for separate
collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
Black & Decker provides a facility for the collection
and recycling of Black & Decker products once
they have reached the end of their working life. To
take advantage of this service please return your
product to any authorised repair agent who will
collect them on our behalf.
You can check the location of your nearest
authorised repair agent by contacting your local
Black & Decker offi ce at the address indicated
in this manual. Alternatively, a list of authorised
Black & Decker repair agents and full details of our
after-sales service and contacts are available on
the Internet at: www.2helpU.com
Batteries
Black & Decker batteries can be recharged
many times. At the end of their useful life,
discard batteries with due care for our
environment:
♦ Run the battery down completely, then remove
it from the tool.
♦ NiCd, NiMH and Li-Ion batteries are recyclable.
Take them to any authorised repair agent or
a local recycling station.
10
All manuals and user guides at all-guides.com
Technical data
Voltage
No-load speed
Max. torque
Chuck capacity
Max. drilling capacity
Steel/Wood
Battery
Capacity
Type
Weight
Battery
Capacity
Type
Weight
Charger
Input voltage
Output voltage
Current
Approx. charging time h 8-10
Voltage
No-load speed
Max. torque
Chuck capacity
Max. drilling capacity
Steel/Wood
Masonry
Battery
Capacity
Type
Weight
Battery
Capacity
Type
Weight
EPC126 (H1) EPC146 (H1) EPC186 (H1)
V 12 14.4 18
DC
-1
min 0-450/ 0-450/ 0-400/
0-1,400 0-1,500 0-1,350
Nm 18 20 25
mm 10 10 10
mm 10/25 10/25 10/25
A12/A12E A14/A14E A18/A18E
Ah 1.2 1.2 1.2
NiCd NiCd NiCd
kg 0.5 0.6 0.7
A12NH A14NH A18NH
Ah 1.5 1.5 1.5
NiMH NiMH NiMH
kg 0.6 0.7 0.9
90500843 90500844 90500845
90500847 90500848 90500849
90500855 90500856 90500857
90500858 90500859 90500860
V 230-240 230-240 230-240
AC
V 14.5-15.3 17.4-18.2 21.75-22.6
DC
mA 210-220 200-210 210-230
8-10 8-10
EPC128 (H1) EPC148 (H1) EPC188 (H1)
V 12 14.4 18
DC
min -1 0-450/ 0-450/ 0-400/
0-1,400 0-1,500 0-1,350
Nm 18 22 25
mm 10 10 10
mm 10/25 10/25 10/25
mm 10 10 10
A12/A12E A14/A14E A18/A18E
Ah 1.2 1.2 1.2
NiCd NiCd NiCd
kg 0.5 0.6 0.7
A12NH A14NH A18NH
Ah 1.5 1.5 1.5
NiMH NiMH NiMH
kg 0.6 0.7 0.9