STIL STATION METEO PROFESSIONNELLE AVEC CAPTEUR SANS FIL 5-EN-1 Manuel De L'utilisateur page 35

HI / LO ALERT
HI/LO alert are used to alert you of certain weather conditions. Once activated, the alarm will turn on and
amber LED starts flashing when a certain criterion is met. The following are areas and type of alert provided:
Note: Daily rainfall since midnight.
To set the HI / LO alert
1. Press the [ ALERT ] button until the desired area is selected.
2. Use [ UP ] / [ DOWN ] buttons to adjust the setting.
3. Press [ ALERT ] button to confirm and continue to next setting.
To enable/disable the HI / LO alert
1. Press [ ALERT ] button until the desired area is selected.
2. Press [ALARM] button to turn the alert on or off.
3. Press [ ALERT ] button to continue to next setting.
Note:
1. The unit will automatically exit setting mode in 5 seconds if no button is pressed.
2. When ALERT alarm is on, the area and type of alarm that triggered the alarm will be flashing and the alarm
will sound for 2 minutes.
3. To silence the Alert alarm beeping, press the [ SNOOZE / LIGHT ] / [ALARM] button, or let the beeping
alarm automatically turn off after 2 minutes.
3