Publicité
Les langues disponibles
Les langues disponibles
Time setting
The unit automatically set itself accordingly to the Radio Controlled Clock signal it received. To set the clock/
calendar manually, first disable the reception by holding the RCC button for 8 seconds.
To manually set the clock / Time Zone selection
1. Press and hold [ CLOCK ] button for 2 seconds until "12 or 24Hr" flashes.
2. Use [ UP ]/[ DOWN ] button to adjust, and press [ CLOCK ] button to proceed to the next setting.
3. Repeat 2 above for setting of TIME ZONE, HOUR, MINUTE, SECOND, YEAR, MONTH, DATE, HOUR
OFFSET, LANGUAGE and DST.
Note:
1. The unit will automatically exit setting mode if no button was pressed in 60 seconds.
2. The hour offset is for DCF and MSF version. Its range is between -23 and +23 hours.
3. The language options are English (EN), French (FR), German (DE), Spanish (ES), and Italian (IT).
4. DST (Daylight Saving Time) feature is set to Auto (factory set). The clock has been programmed to
automatically switch when the daylight saving time is in effect. User can set the DST to OFF to disable the
feature.
To one-time Stop / Activate RCC signal reception
1. During the RCC reception, press [ RCC ] button to stop the current RCC reception.
2. During the normal time mode, press [ RCC ] button to activate the RCC reception at once.
To permanently Disable / Enable RCC signal reception
1. Press and hold [ RCC ] button 8 seconds to disable the reception.
2. Press and hold [ RCC ] button 8 seconds to enable automatic RCC reception.
To turn on/off alarm clock (with ice-alert function)
1. Press the [ALARM] button anytime to show the alarm time.
2. Press [ALARM] button to activate the alarm.
3. Press again to activate alarm with ice-alert function.
4. To disable the alarm, press until the alarm icon disappears.
To set the alarm time
1. Press and hold [ALARM] button for 2 seconds to enter alarm setting mode. HOUR will begin to flash.
2. Use [ UP ]/[ DOWN ] button to adjust HOUR, and press [ALARM] button to proceed to set MINUTE.
3. Repeat 2 above to set MINUTE, then press [ALARM] button to exit.
Note: Pressing the [ALARM] button twice when alarm time is being displayed will activate the
temperature-adjusted pre-alarm. The alarm will sound 30 minutes earlier if it detects outside temperature is
below -3°C.
RC on
RC off
Publicité
