Publicité
Les langues disponibles
Les langues disponibles
DISPLAY MAIN UNIT
Stand and batteries installation
The unit is designed for desktop or wall mount for easy viewing.
1. Remove the battery door of the main unit.
2. Insert 3 new AA size batteries according to the "+/-" polarity mark on the battery compartment.
3. Replace the battery door.
4. Once the batteries are inserted, all the segments of the LCD will be shown briefly before entering the
radio-controlled time reception mode.
5. The RC clock will automatically start scanning for the radio-controlled time signal in 8 seconds.
Note:
1. If no display appears on the LCD after inserting the batteries, press the [ RESET ] button by using a
pointed object.
2. In some cases, you may not receive the signal immediately due to the atmospheric disturbance.
Pairing of wireless 5-in-1 sensor with Display Main Unit
After insertion of batteries, the Display Main Unit will automatically search and connect the wireless 5-in-1
sensor (antenna blinking).
Once the connection is successful, antenna mark and readings for outdoor temperature, humidity, wind speed,
wind direction, and rainfall will appear on the display.
Changing batteries and manual pairing of sensor
Whenever you changed the batteries of the wireless 5-in-1 sensor, pairing must be done manually.
1. Change the batteries to new ones.
2. Press the [ SCAN ] button.
3. Press the [ RESET ] button on the sensor.
Note:
1. Pressing [ RESET ] button at bottom of wireless 5-in-1 sensor will generate a new code for pairing
purpose.
2. Always dispose old batteries in an environmental safe manner.
Radio-controlled / atomic clock function
When the unit receives RC signal, a sync-time symbol "
Note:
1. The strength of radio-controlled time signal from the transmitter tower may be affected by geographical
location or building around.
2. Always place the unit away from interfering sources such as TV set, computer, etc.
3. Avoid placing the unit on or next to metal plates.
4. Closed areas such as airport, basement, tower block, or factory are not recommended.
" will appear on the LCD, and synchronizes daily.
Publicité
