PRESIDIUM PGI-TD5612 Mode D'emploi page 30

When the probe tip is pressed against the Calibration
Disk (Fig. 5.5a), the display screen will show the process
of calibration (Fig. 5.5b). Calibration is done for each
Calibration Disk when the display screen shows the
completed calibration meter and the word "Successful"
appears on the screen (Fig. 5.5c).
1
Fig. 5.5a
Fig 5.5 (a), (b) & (c) exhibit the steps of
calibration using Disk 1 (gray disk)
You will be prompted to perform the same calibration
process with Disk 2 by pressing the probe tip against
Disk 2.
When calibration on both disks are done, you will
be prompted on the screen to press "Select" to exit
calibration mode (Fig. 5.7).
27
Fig. 1.10a
USE DISK ONE
DEPRESS TIP
PLEASE WAIT
CALIBRATING
SUCCESSFUL
DEPRESS TIP
2
Fig. 5.7
Fig. 5.5b
Fig. 5.5c