Publicité
Les langues disponibles
Les langues disponibles
Settings – Color
Press "Select" at the option "Color" to either turn it on or
off. (Fig. 4.2)
By selecting "Color On", you will be switching on the
Color separation function. The tester will automatically
prompt you for your color input after a test is done, so you
may input the color, thereby narrowing down the possible
results.
By selecting "Color Off", the tester will not prompt you for
your color input after a test is done. It will then only give
you the possible results based on thermal conductivity.
Note: When Results are displayed, you may still input or
change color by navigating down and "Select" Color in
the Results menu where there will be 12 colors for you
to choose from.
To exit Settings menu, navigate downwards and "Select"
Exit.
4.2 Calibrate Function
Test
Settings
> Calibrate
Library
You may calibrate the tester to check on its accuracy
using the provided Calibration Disk and by selecting
Calibrate in the main menu.
For more instructions on Calibrate function, please refer
to Section 5 – Calibration.
Fig. 4.2
22
Publicité
