Black & Decker KR540 Mode D'emploi page 22

All manuals and user guides at all-guides.com
ENGLISH
AFTER SALES SERVICE FOR THE BLACK & DECKER
PRODUCT (UK, AUSTRALIA AND NEW ZEALAND ONLY)
Black & Decker offers a nationwide network of
authorised service agents. The use of other than genuine
Black & Decker accessories and parts may damage or
reduce the performance of your Black & Decker product
and may also endanger the user. The terms and
conditions of the warranty may also be effected.
OUR AFTER SALES SERVICE POLICY
(UK, AUSTRALIA AND NEW ZEALAND ONLY)
It is our aim that all Black & Decker customers
should be totally satisfied with their Black & Decker
product and after sales service, but if help or advice
is needed please contact your local Black & Decker
authorised repair agent who will be happy to help.
Full details of our after sales service and a list of
these agents can be found on the Internet at
www.2helpU.com. Alternatively, call our Service and
Information Centre whose number you will find
towards the back of this manual.
ACCESSORIES
The performance of any power tool is dependant upon
the accessory used. Black & Decker accessories are
engineered to high quality standards and are designed
to enhance the performance of your tool. Buying a
Black & Decker accessory will ensure that you get the
very best from your Black & Decker tool.
TECHNICAL DATA
The level of sound pressure of the tool is in
accordance with EEC legislation. It is recommended
that you take appropriate measures for the
protection of your hearing if the sound level seems
uncomfortable. This normally equates to a sound
pressure in excess of 85dB (A).
KR540 KR550
Voltage 230V 230/240V
Power 540W 550W
-1
No load speed 0-2800min 0-2800min
Drilling capacities:
Steel 13mm 13mm
Concrete 13mm 13mm
Wood 25mm 25mm
KR600 KR650F
Voltage 230/240V 230/240V
Power 600W 650W
-1
No load speed 0-3000min 0-3000min
Drilling capacities:
Steel 13mm 13mm
Concrete 13mm 13mm
Wood 25mm 25mm
22
KR540-600 ML p20-34
@ @ @ @ P @ P P P @ P @ P P @ P P @ @ P @ @ P @ P P y P P @ P @ @ P @ P P P @ @ P @ @ @ P @ @ P P @ P P P P P P P @ @ P @ P @ @ P @ @ @ P @ @ @ P
7
5
•
@ @ P P @ @ P y @ @ P @ P @ @ @ @ @ P @ P @ P @ @ P @ P P @ P @ @ P P P @ P P P @ P P P @ P @ @ @ @ @ @ @ P P @ P @ P P @ P P P @ P P P @ P P P @
6
3
@@ yy @@ @@ @@ PP @@ PP @@ PP @@ PP @@ PP @@ PP PP @@ @@ PP @@ PP @@ PP @@ PP @@ PP @@ PP @@ @@ PP @@ PP PP @@ @@ @@ @@ @@ @@ @@ @@ PP @@ PP @@ @@ PP @@ @@ PP @@ @@ PP PP PP @@ PP PP PP PP PP PP PP PP PP PP PP @@ PP PP
7
PP @@ @@ PP @@ PP @@ PP PP PP PP @@ PP @@ @@ @@ @@ PP @@ PP @@ PP @@ PP yy PP PP @@ PP @@ @@ @@ @@ @@ @@ @@ @@ @@ PP PP @@ PP @@ PP @@ @@ @@ PP @@ @@ @@ PP PP @@ PP PP PP @@ PP PP PP @@ PP PP PP @@ PP PP PP @@ PP PP @@
5
•
6
3
Note: This user manual also covers more than one
catalogue number within this product group. Refer to
your carton for details of your product.
FEATURES
1. Variable speed on/off switch
2. Lock-on button
3. Side handle
4. Adjustable depth stop
5. Chuck jaws
-1
6. Chuck
7. Hammer/drill switch
8. Forward/reverse switch
Your drill includes some or all of these features.
• The on/off switch or variable speed switch is used
to operate your drill in all modes of operation.
• The lock-on button provides continuous operation
of your drill.
• The side handle gives a secondary gripping
position for your drill.
• Your drill can operate as a hammer drill or as a
-1
rotary drill depending on the setting of the
hammer/drill switch.
• The forward/reverse switch controls the direction
of rotation when your drill is used as a
screwdriver, or when clearing a jammed drill bit.
22
P P P P @ @ @ @ y y @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ P P @ @ P P @ @ @ @ @ @ P P @ @ P P P P @ @ P P P P P P @ @ P P P P P P @ @ P P P P P P @ @ P P P P P P P P @ @ P P P P P P P P P P P P P P @ @ P P @ @ P P P P @ @ P P P P @ @ @ @ P P @ @ @ @ @ @ P P @ @ @ @ @ @ P P @ @ @ @ @ @ P P @ @ @ @
8
•
•
• 4
• 2
•
1
•
@ @ @ @ @ y @ P @ P @ @ P @ @ P @ @ @ P P @ @ P @ @ @ P @ @ @ P @ @ @ P P @ P P P @ P P P @ P P P @ P P P @ P P P @ P P P @ P P P @ P P P @ P @ @
8
•
4
•
•
•
2
•
1
•
06-02-2001, 15:48