Chauvet DJ Freedom Strip HEX-4 Manuel De Référence page 7

Freedom™ Strip Hex-4 QRG
DMX Linking
Starting Address
Master/Slave
Connection
Wireless
Configuration
All manuals and user guides at all-guides.com
The Freedom™ Strip Hex-4 works with a DMX controller. Information about
configuring Freedom™ Strip Hex-4 for
User Manual, which
http://www.chauvetlighting.com/product-manuals-literature/. Information about DMX
is in the CHAUVET® DMX Primer, which is available from the Chauvet
website: http://www.chauvetlighting.com/downloads/DMX_Primer_rev05_WO.pdf.
To ensure full access to all channels in each DMX mode, the highest
recommended DMX address for this product is 495.
The Freedom™ Strip Hex-4 works in Master/Slave mode. Information about
configuring this product
User Manual, which
http://www.chauvetlighting.com/product-manuals-literature/.
The Freedom™ Strip Hex-4 can be operated in wireless D-Fi™ mode. For more
information about configuring this product to transmit or receive in wireless
D-Fi™ mode, download instructions for the Freedom™ Strip Hex-4 User Manual
from www.chauvetlighting.com/product-manuals-literature/.
Freedom™ Strip
Hex-4 sends
wireless DMX
signal to other
wireless
products
You can wirelessly sync an unlimited amount of receiving products to one
transmitting product.
To ensure strong signals, the units should be elevated 5 feet or higher off the
ground and remain in an unobstructed line of sight of each other.
For the best results, add individual receivers using Manual mode to ensure
you can select the same channel for the additional products.
DMX operation is in the
is available from
for Master/Slave
is available from
7
EN
the Chauvet website:
operation is in its
the Chauvet website