Publicité
Les langues disponibles
Les langues disponibles
5. Operation
CONFIGURATION
DEVICE SETTINGS
Threshold
Value(s)
Overload Alert Lvl.
• Enter: 5-105%
Conf. Fault Action
• Go to bypass (factory setting)
(UPS response to
• Go to standby
fault)
Bypass Low Limit
• Enter: -5% to -20%
Bypass High Limit
• Enter: +5% to +20%
18-09-247-933652.indb 17
All manuals and user guides at all-guides.com
DEVICE THRESHOLDS
(factory setting is 100%)
(factory setting is -15%)
(factory setting is +10%)
17
Description
Sets the UPS output load percentage before
an overload alert is sent.
Sets the UPS response to fault conditions
that require the UPS to exit double-
conversion mode. GO TO BYPASS option
maintains AC output (so long as input
voltage is within bypass high/low limits). GO
TO STANDBY option causes the UPS to turn
off output AC in response to fault conditions.
Specifies the lowest acceptable input
voltage for bypass operation.
Specifies the highest acceptable input
voltage for bypass operation.
2/13/2019 3:27:33 PM
Publicité
