Enjoying Original 2Ch Sound (Stereo) - Yamaha DVR-S150 Mode D'emploi

Enjoying original 2ch sound
(Stereo)
You can play back original stereo sounds such as music
CDs with the front speakers.
STANDBY/ON
AUDIO ANGLE
SURROUND SELECT MATRIX 6.1
REPEAT
NIGHT
SW CENTER
SET MENU
TV INPUT
TV CH
A B C D E
PRESET
PTY SEEK
FREQ/RDS MODE
ON SCREEN
START
YPAO
CH
ENTER
STATUS
ON/OFF
TV VOL
MUTE
AMP
DVD/CD
VCR
TUNER
MOVIE MUSIC SPORTS
CINEMA
POWER
TV
SUBTITLE
STEREO
STEREO
A-B
SURR
SHIFT
SLEEP
PRESET
START
MENU
CH
RETURN
TEST
VOLUME
AMP
VIDEO
GAME
1
Play the 2ch source you want to listen to.
2
Press AMP.
3
Press STEREO.
The sound field effect turns off and Stereo playback
starts.
y
If Stereo is activated, "STEREO" appears in the CinemaStation
display.
To turn off Stereo playback (turn on the
sound field effect)
Press STEREO again.
y
• Either front speakers or subwoofer produce(s) LFE channel
sounds depending on the "BASS" setting in the Set Menu
(page 77).
• If "BASS" is set to "BOTH" or "FRONT" is set to "SML" in
the Set Menu (page 77), the subwoofer produces low tones.
Notes
• If Stereo playback is selected (no sound field effect), either
center speaker or surround speakers produce(s) no sound.
• If Stereo playback is selected (no sound field effect) and "D.
Range" is set to "MIN" in the Set Menu (page 78), the volume
may become very low. In this case, turn off Stereo playback.
• If you play a Dolby Digital or DTS sound when Stereo playback
is selected (no sound field effect), the volume balance of the
front speakers may be disturbed because the compressed
dynamic range mixes the front speaker's channel sounds. In this
case, turn off Stereo playback.
Enjoying High-Quality Sound
63