Enjoying High-Quality Video (Ntsc/Progressive Scan) - Yamaha RDX-E700 Mode D'emploi

Progressive Scan is video that represent a frame with one pass of sequential scan lines whereas interlace output video,
which is usually adopted for most TVs, represents a frame with two passes. Progressive Scan provides better video
quality by reducing picture noises. To enjoy DVDs with Progressive Scan, you need to connect the DVD receiver to a TV
that has component video input jacks compatible with Progressive Scan. For details on connections, refer to "Other
connection methods" (page 9).
GUI
SET UP
SET UP
TV VOL
+
–
EQ
DIRECT
SUBTITLE ANGLE
Notes
• If you play video with a 4:3 aspect ratio on a 16:9 wide television screen, Progressive Scan may fill the screen top to bottom. In this
case, change the screen aspect setting of your TV with the OSD menu (page 19). If you cannot adjust the ratio, press SET UP to
display the OSD menu and then press ZOOM to turn off the Progressive Scan mode (use the interlace output mode).
• CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH
THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 PROGRESSIVE
SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT YOU SWITCH THE CONNECTION TO THE "STANDARD
DEFINITION" OUTPUT. IF THERE ARE QUESTIONS REGARDING YOUR VIDEO MONITOR COMPATIBILITY WITH THIS
UNIT, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.
• This unit is compatible with the complete line of projectors and plasma displays made by YAMAHA.
For U.K. and Europe models only
When the RGB/YUV selector switch (page 9) is set to "RGB", Progressive Scan is not available.
ENJOYING HIGH-QUALITY VIDEO
(NTSC/PROGRESSIVE SCAN)
MENU
ENTER
TOP MENU
/RETURN
VOLUME
MUTE
+
–
NIGHT
TV DVD/CD
AUX TUNER
ZOOM AUDIO
ZOOM

ENJOYING HIGH-QUALITY VIDEO (NTSC/PROGRESSIVE SCAN)

DVD-V
■ To turn on the Progressive Scan mode
While disc playback is stopped, press SET UP to
display the OSD menu and then press ZOOM.
The Progressive Scan mode is activated and the
"PROGRESSIVE" indicator lights up in the DVD
receiver display.
■ To turn off the Progressive Scan mode
While disc playback is stopped, press SET UP to
display the OSD menu and then press ZOOM.
y
• When the Progressive Scan mode is off, the DVD receiver
provides video with interlace output mode.
• During playback, you cannot switch between the Progressive
Scan mode and the interlace output mode.
31