Publicité
Les langues disponibles
Les langues disponibles
SYMpTOM
Light does not come
on.
Light does not turn off.
Lights do not stay on
as desired.
please call 1-800-858-8501 (English speaking only) for assistance
If you experience a problem, follow this guide. You may also want to visit our Web site at: www.
hzsupport.com. If the problem persists, call* for assistance at 1-800-858-8501 (English speaking
only), 7:30 AM to 4:30 PM CST (M-F). You may also write* to:
HeathCo LLC
P.O. Box 90004, Bowling Green, KY 42102-9004
ATTN: Technical Service
* If contacting Technical Service, please have the following information available: Model Number,
Date of Purchase, and Place of Purchase.
All manuals and user guides at all-guides.com
TrOUBLESHOOTINg
pOSSIBLE CAUSE
1. Circuit breaker or fuse is
turned off.
2. If the lamp being controlled
has another switch, it may
be turned off.
3 Bulb is burned out.
4. Poor connection.
5. ON/OFF button not
pushed.
1. Switch is being triggered
by air vent or other heat
source.
2. Motion is still present.
3. Delay set by TIME control
has not expired.
4. Control may be wired
wrong.
1. Motion has stopped in the
room.
2. TIME control is set for too
short a delay.
TECHNICAL SErvICE
before returning product to store.
No Service parts Available for this product
1. Turn circuit breaker on.
2. Turn other switch on.
3. Replace light bulb.
4. Verify all wiring connections.
5. Press the ON/OFF button.
1. Move switch to other switch
2. Make sure there is no motion
3. Set switch TIME control to
4. See Installing Sensor, page
1. Continue movement.
2. Set switch TIME control to
4
SOLUTION
location or determine the
source triggering the switch
and alter air flow.
during TIME control period.
shorter time period.
2.
longer time period.
598-1232-02
Publicité
