Publicité
Les langues disponibles
Les langues disponibles
3. Remove the screws from the middle hinge and
then remove the middle hinge. Lift the fridge
door and place it on a padded surface to
prevent it from scratching.
Remove the blank covers and then fit them to
the opposite side.
4. Remove the screws, bottom hinge with
adjustable foot from the bottom of the
appliance.
5. Remove the remaining adjustable foot from the other side of the bottom of the appliance.
6. Unscrew the hinge pin from the bottom hinge. Turn over the bottom hinge and refit the screw the
hinge pin onto the bottom hinge. Reattach the bottom hinge to the opposite side.
7. After replacing the fridge door, screw the middle hinge back onto the opposite side.
Ensure the lower door is
aligned horizontally and vertically so
that the seals are closed on all sides
before finally tightening the hinge.
8. Unscrew the right middle stopper with metal block from the bottom of the freezer door and then
install the left middle stopper with metal block on the left side of the bottom of the freezer door.
(1
Publicité
