Publicité
Les langues disponibles
Les langues disponibles
4.4.2. Cleaning
The
QUICKSALT
chlorinator has a cell self-cleaning system, which prevents lime deposits on the
surface of the electrodes.
Depending on the hardness of the water in your pool, you can set the unit for more frequent
cleaning (decrease the time between cleanings) or increase it.
This value can be adjusted from 2h (very hard water) to 8h (soft water).
Note that more frequent self-cleaning cycles mean shorter electrolysis cell life.
4.4.3. Language
Allows you to select the language of the equipment menus.
4.4.4. Audible Alarm
It is possible to activate or deactivate the acoustic warning, in case of an alarm.
Please note that if the warning is silenced, the unit will also display the alarm on the screen and
stop production. If you disable this option, regular monitoring is recommended to check that there
are no operating incidents.
4.4.5. Model
Maximum production can be selected, as indicated on chapter 4.1.
Please, note that a higher production selection results in a shorter electrolysis cell life. The
following table shows the production and its approximated cell's life matching.
QUICKSALT -15
QUICKSALT -25
QUICKSALT - 35
Selected production (g/h)
15
25
35
MANUAL DE USUARIO
Maximum cell life (h)
11600
7000
5000
49
Publicité
