MANUAL DE USUARIO
2.4. Electrical Installation
Once you have checked that the hydraulic installation does not present any losses,
you can connect your QUICKSALT chlorinator to the electrical control panel.
2.4.1. Connection to the switchboard
Attention:
Disconnect the power supply to the panel before handling it. Never
open the switchboard without having disconnected the power from the main
switchboard. There is a danger of electrocution.
42
The electrical connection must be made in such a way that the
QUICKSALT
chlorinator is started only when the filtration pump is in
operation. Therefore, be sure to carefully choose the right contactor
output.