Quick Salt e-360 Manuel De L'utilisateur page 43

1) For safety reasons, it is very important to check if the earthing is in good condition. If you do not
have one, you will have to install a specific grounding rod for the electrical panel, to which you
can connect the grounding cables of the
element with an earth connection located in your pool installation.
2) Check that the switchboard has the appropriate protection elements for its installation: Thermal
circuit breaker, differential switch and motor protection for the filtration pump.
3) Connect the power cable of your
neutral and ground connections. Do not leave the cable on the floor of the installation, but ensure
that it is well protected and anchored to the wall. If the distance is insufficient and you need to
extend it, do not use a roll-up extender. Consult your electrician or service technician if in doubt.
QUICKSALT
Your saline chlorinator is already installed. Please read carefully the following
sections detailing how to perform the start-up.
QUICKSALT chlorinator, filtration pump and any other
QUICKSALT equipment to the panel, respecting the phase,
MANUAL DE USUARIO
43