Publicité
Les langues disponibles
Les langues disponibles
MANUAL DE USUARIO
4. Operation
Chlorine production runs continuously every time it is connected to the mains, i.e. every time the
filter pump is started. Production will therefore stop when the filtration pump stops.
The size of your pool, and the hours of filtration per day, and the season of the year in which it is
located, determine to a great extent the percentage of production at which the equipment will be
configured to achieve a production around 2 ppm of Cl2 per day to keep the water disinfected and
in perfect condition for a pleasant use by the users, a good starting point would be 60% and from
here adjust the appropriate one.
Note:
You can adjust the chlorine production according to the season, and can
reduce the production when the water is colder and therefore the demand for
chlorine decreases.
4.1. Maximum production configuration
Please, select first the maximum chlorine production that is suitable for your installation, checking
the following table:
Note:
A limit production of 15, 25 or 35g/h can be selected on the model menu
(depending on the pool size and filtration hours). However, this is the maximum
production of the unit. Once it is selected, the unit can be adjusted from 10 to 100%
depending on the expected chlorine demand, season, number of bathers, etc.
46
POOL VOLUME m
UNTIL 30m
UNTIL 90m
3
6h
25g/h
8h
15g/h
3
UNTIL 135m
3
3
35g/h
25g/h
35g/h
Publicité
