KitchenAid KFP1322 Instructions page 12

aSSEMblINg ThE FOOd PROCESSOR
With the work bowl installed, slide the
3
drive adapter onto the power shaft.
TIP: You may need to turn the disc/drive adapter until it drops down into place.
OPERaTINg ThE FOOd PROCESSOR
Using the Food Pr_ocessor_
Rotating Blade Hazard
Always use food pusher.
Keep ngers out of openings.
Keep away from children.
Failure to do so can result in
amputation or cuts.
To turn on, press LOW or HIGH. The
1
Food Processor will run continuously
and the indicator light will glow.
12
Install the work bowl cover, being sure
4
it locks into place.
Before operating the Food Processor, be
sure the work bowl, blades, and work bowl
cover are properly assembled on the Food
Processor base (see "Assembling the Food
Processor" section).
This line on the work bowl indicates
the maximum level of liquid that can be
processed by the Food Processor.
When finished, press the OFF button.
2
The indicator light will go out and the
blade or disc will slow to a stop.