Publicité
Les langues disponibles
Les langues disponibles
Controls
When you touch a symbol, the respective function is activated.
Notes
The settings will remain unchanged if you touch several
■
symbols at once. This allows you to wipe up spills on the
control panel.
Always keep the controls dry. Moisture reduces their
■
effectiveness.
Before using for the first time
In this section, you can find out what you must do before using
your Teppan Yaki to prepare food for the first time. Read the
Safety information section beforehand.
Cleaning
Clean the Teppan Yaki thoroughly with lukewarm soapy water
before first use.
Setting the Teppan Yaki
In this section, you can find out how to set the Teppan Yaki.The
table shows temperatures and cooking times for various meals.
Switching the Teppan Yaki on and off
Use the main switch to switch the Teppan Yaki on and off.
Switching on: Touch the
#
The indicator above the main switch lights up. The Teppan Yaki
is ready for use.
Switching off: Touch the
#
main switch goes out. The Teppan Yaki is switched off.The
residual heat indicator remains on until the Teppan Yaki has
cooled down sufficiently.
Note: The Teppan Yaki switches off automatically if the grill
setting is set to 0 for more than 20 seconds.
Setting the temperature
Switch the Teppan Yaki on using the main switch.
1.
.
.
. and the
symbol light up in the temperature display.
‹
‹
‹
N
Slide your finger along the settings range until the desired
2.
temperature appears on the display.
Once the set temperature is reached, a signal sounds and the
heating indicator goes out. Now you can place the food on the
Teppan Yaki.
Note: The Teppan Yaki regulates the heat level by switching on
and off. Even at maximum power, the heating can switch on
and off.
14
symbol. An audible signal sounds.
symbol until the indicator above the
Residual heat indicator
The Teppan Yaki has a two-stage residual heat indicator.
If an
appears in the display, the Teppan Yaki is still hot. When
•
the Teppan Yaki cools down further, the display switches to
The indicator goes out when the Teppan Yaki has cooled down
sufficiently.
Heating the Teppan Yaki
To get rid of the new cooker smell, heat up the empty Teppan
Yaki. 30 minutes at 240 °C is ideal.
Keep warm setting
The Teppan Yaki must be switched on.
Select the keep warm setting
Do not try to keep too much food warm at once. All food to be
kept warm should be in contact with the grilling surface, as
otherwise it will cool down. Do not keep food warm for too long
as it will dry out.
Cleaning level
In cleaning level
,
, the appliances heats up to 40 °C. You
can leave dirt to soak by adding some water and washing-up
liquid to the grilling surface (max. 1 hour). After dissolving the
dirt, you can begin cleaning.
Switching off the rear heating zone
When preparing small quantities, you can choose to use only
the front zone. You can use the rear zone to keep the food
warm.
The Teppan Yaki must be switched on.
Touch the
symbol. The indicator above the symbol lights up.
Q
The rear heating zone is now switched off.
When you switch the appliance on again, this setting is
retained. You can change this behaviour in the basic settings.
f
in the settings range.
.
œ
Publicité
