Publicité
Les langues disponibles
Les langues disponibles
fridge is working, the grille at the back may become hot and the sides warm. It must therefore be
installed so that the back of the fridge has at least 9cm of free space and the sides have 2 cm.
Do not drape the fridge with any covering.
Leveling the fridge
If the fridge is not level, the door and magnetic seal alignment will be affected and may cause you
fridge to work incorrectly. Once the fridge is placed in its final location, adjust the leveling feet at the
front by turning them.
Cleaning before use
Wipe the inside of the fridge with a weak solution of bicarbonate of soda. Then rinse with warm water
using a damp sponge or cloth. Wash the baskets and shelves in warm soapy water and dry
completely before replacing in the fridge.
Before plugging in
Check that you have a socket which is compatible with the plug supplied with the fridge.
DO NOT SWITCH ON UNTIL FOUR HOURS AFTER MOVING THE FRIDGE.
The coolant fluid needs time to settle. If the appliance is switched off at any time, wait 30 minutes
before switching back on to allow the coolant fluid to settle.
Before filling your fridge
Before storing foods in your fridge, turn the fridge on and wait for 4 hours, to make sure it is
working properly and to allow the fridge to fail to the correct temperature.
4. OPERATING YOUR APPLIANCE
Temperature Control
Your refrigerator has one control for regulating the temperature. The temperature control is located
on the lower right-hand corner.
The first time you put your appliance into operation, set the thermostat to "4" and let it run empty for
4 hours before storing food for it to cool sufficiently.
The range of the temperature control is from position" 1" the warmest to "7" the coldest. Adjust the
temperature control to the setting that best suits your needs. The setting of "4" should be appropriate
24
Publicité
