6. The LEDs and their meaning
LEDs red:
(3) Error display
(Blinks when an error is detected.)
SHORT
REVERSED
MISWIRED
SPLIT PAIRS
(5) CONT
Lights up when the circuit is closed. If the impedance is low,
the LED lights brighter.
(7) ON / OFF
Power indicator / If the power indicator (7) is flashing, replace
the batteries.
(12) SCAN
Lights when an audio signal is sent.
(13)
Lights up at high scanning speed or at high audio frequency.
Hz
S
F.
LEDs green
1 - 8 + G
Wiring Display
short ciurcuit
wires swapped
wiring error
pairing error
(Note Fig. 3)
(Note Fig. 4)
(Note Fig. 5)
(Note Fig. 6)
EN 8