AEG Smart 64 Guide D'utilisation Rapide page 10

10
7 WIRELESS CONNECTION (WI-FI®)
The handset Wi-Fi can be accessed at any time using the settings
menu. To use Wi-Fi, you must first make sure it is turned on.
1. From the Home screen, tap
2. Slide bar next to Wi-Fi to the ON position.
3. Tap Wi-Fi and select a network you want to connect to.
• If the network is secured, you will be prompted to enter a
password.
• If your Wi-Fi network is not shown on the menu, try scanning for
it by tapping
4. Tap on the Password edit box to launch the on-screen keyboard.
5. Enter the Wi-Fi network password and tap Done.
6. Tap Connect.
• The handset will search for the IP address of the network you
have selected. This may take a few minutes.
• When connected,
8 REGISTERING HANDSET TO BASE
Note: This should only be required if you want to register another
handset. The handset supplied with your base should already be
registered and not need registering again.
1. Press and hold the Register Button on the base for at least 5
seconds.
2. On the handset screen tap
Register the handset > OK.
All manuals and user guides at all-guides.com
> Settings.
> Scan.
appears on the status bar of the handset.
> Settings > Dect manager >