Eneo VMC-10.4LED-CM Guide D'installation Rapide page 19

1) BRIGHTNESS
2) CONTRAST
3) H POSITION
4) V POSITION
5) PHASE
6) PIXEL FREQ.
COLOR
The tone of color can be changed from red-dish white to bluish white.
The individual color components are also user customizable.
* With VOL ▸, go to SUB MENU. After adjusting in SUB MENU, press MENU
to exit.
The color temperature could be changed based on the LCD
specification.
1) 9300K Change color temperature : Red 42 Green 52 Blue 50
2) 7300K Change color temperature : Red 51 Green 46 Blue 46
3) 6500K Change color temperature : Red 40 Green 54 Blue 54
4) USER User customizable. (RED, GREEN, BLUE)
All manuals and user guides at all-guides.com
Adjust the brightness of DSUB ANALOG without affecting
AV's brightness.
Adjust the contrast of DSUB ANALOG without aff ecting
AV's contrast.
Adjust the horizontal position of the image.
Adjust the vertical position of the image.
Remove the noises. When phase value is wrong, the
image has vertical lines especially in 1 dot on and off.
Adjust the sampling frequency of DSUB analog signal.
PICTURE 9300K 7300K
COLOR
SETUP RED
GREEN
BLUE
6500K USER
50 - +
50 - +
50 - +
DE
EN
FR
PL
RU
19