• Regular servicing will ensure a better and safe riding performance.
• Do not exceed more than 100kg load on bicycle, including rider himself.
• Never have more than one rider on the bicycle.
• Ensure regular maintenance is carried out on the bike according to this owner's manual
• Do not open or attempt maintenance on any electrical components by yourself. Contact your local bicycle
specialist for qualified service and maintenance when needed.
• Never jump, race, perform stunts or abuse your bicycle.
• Never ride under the influence of intoxicating drugs or alcohol.
• We strongly recommend using lights, when riding in the dark, fog or poor visibility.
• When cleaning this bike, please wipe the surface with a piece of soft cloth. For very dirty areas you can wipe
it with a little neutral soap and water.
Warning:
do not wash this electric bike direct with spraying water, especially pressure washers.
Avoid water entering electric components as this may result in damage of the electric components.
3. Operation
Your new electric assistance bicycle is a revolutionary transport means, applying aluminum frame, Li-ion
battery, a super high efficiency electric hub motor and controller with electric pedal assistance system, to
support normal pedaling. The above-mentioned equipment will ensure safe riding with excellent function and
performance. It is important for you to note the following guidelines to ensure getting the best possible
experience from your electric bicycle.
Checklist before riding
3.1.1 Please ensure tyres are fully inflated as indicated on the tyre wall, before riding.
Remember, performance of the bike is directly related to the weight of the rider and baggage/load, together
with the stored energy in the battery;
3.1.2 Charge overnight, prior to riding the next day;
3.1.3 Apply chain oil periodically and clean if dirty or gummed up,using a degreaser, then wipe clean oil
bicycle chain again.
4. Battery installation & usage
The electric bikes have the battery positioned within the rear carrier, the battery pack is directly connected to
the controller box in the front (fig. 2).
7/64