Publicité
Les langues disponibles
Les langues disponibles
Assembly Instruction
THIS PRODUCT MUST BE ASSEMBLED BY A QUALIFIED TECHNICIAN AND SHOULD NOT BE ATTEMPTED BY
ANY ONE WHO IS NOT TRAINED
Ⅲ. MANUAL FOR THE ELECTRIC PARTS OF E-2100RM (E-2000 ECO LS)
The rider must pedal forward to obtain any assistance from the motor. This is an important safety feature. This
electric pedal assistance bikes will provide assistance up to 25 Km/h, after that the motor will cut out. You may
go faster but must do so under your own effort without the electric assistance.
To start the bike, turn on the main switch on the side of the battery, the LED on the handlebar panel will light
up. The motor will not work until you pedal a full revolution of the chain wheel. This feature protects the
motor and controller from damage and extends the service life of the electric components.
Contents
1. Structure of an electric assistance bike
2. Important safety cautions
3. Operation
4. Battery Installation & usage
5. LED and function
6. Using and maintaining the battery
7. Using and maintaining the charger
8. Using and maintaining the electric hub motor
9. Maintaining the controller
10. Maintaining the "Power-off Control" of the brake lever
11.. Simple trouble shooting
12. Electric circuit diagram and specifications
13. Main technical specification sheet
1. Structure of electric bikes (See partⅠ.Fig 1.)
2. Important safety cautions:
• We strongly advise wear an approved helmet, which meets local standards.
• Obey local road rules when riding on public roads.
• Be aware of traffic conditions
• The rider must be over 14 years old.
• Have your bike serviced only by authorized bicycle shops.
6/64
Publicité
