Télécharger Imprimer la page

Broan Elite EPD61 Serie Guide D'installation page 9

Masquer les pouces Voir aussi pour Elite EPD61 Serie:

Publicité

Les langues disponibles

Les langues disponibles

12. LIGHT BULBS REPLACEMENT
This hood requires 120 V, 50 W, MR16 with GU10 base, shielded halogen lamps (not included).
(2 for 36" width hood and 3 for 48" width hood.)
Do not touch lamps during or soon after operation. Burns may occur. In order to
prevent the risk of personal injury, only install shielded halogen lamps. Also,
never install a cool beam, a dichroïc lamp, a lamp not suitable for use in
recessed luminaires or identified for use in enclosed fixtures.
1. To remove lamps, gently push upwards and
turn counterclockwise to disengage bulb leads
from their grooves.
2. Install the new lamps by placing the bulb leads
into their grooves in the socket.
3. Gently push upwards and turn clockwise until
secure.
NOTE: If need be, use a rubber dishwashing
glove to add grip when removing the bulb.
13. CARE
Baffle Filters
The baffle filters should be cleaned frequently. Use a warm detergent solution. Wash more often
if your cooking style generates greater grease like frying foods or wok cooking.
Remove baffle filters by pushing them towards the front of the hood and rotating filters downward.
Baffle filters are dishwasher safe. Allow filters to dry completely before reinstalling them in the hood.
Clean all-metal filters in the dishwasher using a non-phosphate detergent. Discoloration of the
filter may occur if using phosphate detergent or as a result of local water conditions—but this will
not affect filter performance. This discoloration is not covered by the warranty.
Grease Drip Rail
The grease drip rail should be cleaned frequently. Lift it out from the hood and use a warm detergent
solution. As for the baffle filters, wash more often if your cooking style generates greater grease
like frying foods or wok cooking. Allow grease drip rail to dry completely before reinstalling it in the
hood.
Blowers Cleaning (Internal)
Remove the filters in order to access the blowers. Vacuum blowers to clean. Do not immerse in
water.
Hood Cleaning
Stainless steel cleaning:
Do:
• Regularly wash with clean cloth or rag
soaked with warm water and mild soap or
liquid dish detergent.
• Always clean in the direction of original polish
lines.
• Always rinse well with clear water (2 or 3
times) after cleaning. Wipe dry completely.
• You may also use a specialized household
stainless steel cleaner.
Avoid when choosing a detergent:
• Any cleaners that contain bleach will attack stainless steel.
• Any products containing: chloride, fluoride, iodide, bromide will deteriorate surfaces rapidly.
• Any combustible products used for cleaning such as acetone, alcohol, ether, benzol, etc.,
are highly explosive and should never be used close to a range.
All manuals and user guides at all-guides.com
WARNING
!
- 9 -
1
2
HO0089
Don't:
• Use any steel or stainless steel wool or any
other scrapers to remove stubborn dirt.
• Use any harsh or abrasive cleansers.
• Allow dirt to accumulate.
• Let plaster dust or any other construction
residues reach the hood. During construction/
renovation, cover the hood to make sure no
dust sticks to stainless steel surface.
3

Publicité

loading