AEG KFA29SIO Notice D'utilisation page 77

Problem
and a number come
on.
8.2 If you cannot find a
solution...
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre. Give the
data from the rating plate. Give also
three digit letter code for the glass
ceramic (it is in the corner of the glass
9. TECHNICAL DATA
9.1 Rating plate
Model KFA29SIO
Typ 61 A2A 00 AA
Induction 3.65 kW
Ser.Nr. .................
AEG
9.2 Cooking zones specification
Cooking zone
Middle front
Middle rear
The power of the cooking zones can be
different in some small range from the
data in the table. It changes with the
Possible cause
The cookware is unsuitable.
The diameter of the bottom
of the cookware is too small
for the zone.
There is an error in the hob.
Nominal power PowerBoost [W] PowerBoost
(maximum heat
setting) [W]
1800 2500
1800 2500
Remedy
Use cookware suitable for in‐
duction hobs. Refer to "Hints
and tips".
Use cookware with correct di‐
mensions. Refer to "Technical
data".
Deactivate the hob and acti‐
vate it again after 30 seconds.
If comes on again, discon‐
nect the hob from the electrical
supply. After 30 seconds, con‐
nect the hob again. If the prob‐
lem continues, speak to an Au‐
thorised Service Centre.
surface) and an error message that
comes on. Make sure, you operated the
hob correctly. If not the servicing by a
service technician or dealer will not be
free of charge, also during the warranty
period. The information about guarantee
period and Authorised Service Centres
are in the guarantee booklet.
PNC 949 492 562 00
220 - 240 V, 50 - 60 Hz
Made in: Romania
3.65 kW
maximum du‐
ration [min]
10
10
material and dimensions of the
cookware.
ENGLISH 77
Cookware di‐
ameter [mm]
145 - 180
145 - 180