Marantz RC1400 Mode D'emploi page 7

All manuals and user guides at all-guides.com
i MUTE button
This button is used to mute the audio for the
amplifier and television.
o GUIDE button
This button is used to display the menus for the
DVD player, DSS (satellite broadcasting
tuner), or other AV equipment.
! 0 EXIT button
This button is used to cancel settings in the
menu or program.
! 1 Numeric buttons
These buttons are used to switch between 0 to
9 of the source components. If the source is set
to the amplifier, these buttons are used to
perform operations corresponding to those
shown on the text plate.
! 2 MEMO button
This button is used to store settings to memory
or program a source.
! 3 CONTROL button
These buttons are used when operating the
PLAY, STOP, PAUSE, and other commands of
a source.
! 4 SOURCE button
These buttons are used to switch the source of
your A/V Receiver / amplifier. Each time a
source button is pressed, the remote control
changes to the source which was pressed.
This remote control can control 12 types of
equipment. To change the A/V Receiver /
amplifier source, press this button twice within
two seconds. The signal is sent when it is
pressed the second time.
! 5 LIGHT 1 and 2 buttons
Pressing these buttons will light up the LCD
and its buttons. This lighting time can be set. If
the lighting time is set to 0 seconds, the
backlight turns on only while this button is
pressed. The operations for LIGHT 1 and 2 are
identical.
! 6 CLEAR button
This button is used to erase the memory or
program of a source.
! 7 MENU button
This button is used to display the OSD menu of
an amplifier or other source.
! 8 PREV (Previous) button
This button is used to return to the previous
channel on the television or other device.
5
RC1400N 01 ENG Adobe PageMaker 6.5J/PPC
Page 5 03.10.6, 4:17 PM