Marantz RC1400 Mode D'emploi page 25

All manuals and user guides at all-guides.com
6 Press the
The letter is changed to "A".
• The
the blinking indicator of the section to be
rewritten.
7 Press the
select AUDIO on the direct button
indicator. The A flashes to indicate that the
name can be changed.
8 Press the 7 numeric button !1 to select S.
Each time the button is pressed, the button cycles
through S → T → U → 7 → S.
9 Press the
flashing section.
10 Press the 5 numeric button !1 to select O.
11 Follow the same procedure to enter U, N,
and D.
12 When finished entering the text, press the
OK cursor button @0 .
13 Press the M button r.
The
newly stored codes can be used.
The input is overwritten, and so the currently
displayed text is erased.
Up to six characters can be entered for the direct
button indicator.
E r a s i n g P r o g r a m m e d C o d e s
(Returning to Initial Settings)
Codes can be erased in five ways: by buttons,
direct buttons, direct button pages, sources,
and by all memory contents.
Erasing Buttons and Erasing Direct
Buttons
This example shows how to erase the code
learned from the PLAY button of the DVD
player and the AUTO code of the AMP direct
button.
Erasing buttons
1
USE PAGE 1
RC1400N 01 ENG
cursor button @0 .
or
and cursor buttons can be used to move
cursor buttons @0 to
or
cursor button @0 to move the
USE indicator displays on the LCD, and the
3 4
LEARN
LEARN
USE PAGE 1 2
USE PAGE 1 2
23
Page 23
Adobe PageMaker 6.5J/PPC
03.10.6, 4:18 PM